3
Disassembly/Assembly > Fixing System > Removing the Fixing Motor > Procedure
Removing the Fixing Motor
■ Preparation
1) Remove the Right Cover.(Refer to page 3-16)
2) Remove the Operation Panel Unit.(Refer to page 3-36)
3) Remove the Rear Upper Cover (Left).(Refer to page 3-14)
4) Remove the Upper Front Cover (Right) / USB Cover.(Refer to page 3-18)
5) Remove the Upper Cover.(Refer to page 3-19)
6) Remove the Right Frame Cover.(Refer to page 3-27)
7) Remove the Right Upper Frame/Right Upper Frame Unit.(Refer to page 0-11) / (Refer to
page 3-29)
8) Remove the Main Controller Support Plate.(Refer to page 3-31)
■ Procedure
1) Disconnect the 3 connectors [1], and free the harness [2] from the Harness Guide [A].
x3
[1]
3
Disassembly/Assembly > Fixing System > Removing the Fixing Motor > Procedure
[1]
[1]
[A]
[2]
F-3-169
2) Remove the Harness Guide [1].
• 2 Claws [2]
• 1 Hook [3]
x2
3) Free the harness from the Harness Guide [A], and remove the Sub Power Supply PCB
Unit [1].
• 1 Connector [2]
• 2 Claws [3]
• 2 Bosses [4]
[A]
[2]
[1]
[3]
[4]
x2
[3]
[4]
3-74
[2]
[1]
[3]
F-3-170
[1]
F-3-171
3-74