Fixing Pressure Roller; Before Removing The Fixing Pressure Roller; Removing The Fixing Pressure Roller; Fixing Motor - Canon LBP5050 Series Service Manual

When removing and installing the fixing film unit, be sure not to touch or
damage the fixing film [1].
6) Disconnect the connector [1] and remove the fixing film unit [2] in the di-
rection of the arrow.
[1]

3.5.3 Fixing Pressure Roller

3.5.3.1 Before Removing the Fixing Pressure Roller

LBP5050N / LBP5050
[1]
F-3-89
[1]
[2]
F-3-90
1) Remove the right cover. (page 3-2)[Removing the Right Cover]
2) Remove the left cover. (page 3-2)[Removing the Left Cover]
3) Remove the rear side cover. (page 3-1)[Removing the Rear Side Cover]
4) Remove the upper rear cover. (page 3-1)[Removing the Upper Rear
Cover]
5) Remove the upper cover assembly. (page 3-3)[Removing the Upper
Cover Assembly]
6) Remove the Rear Door. (page 3-1)[Removing the Rear Door]
7) Remove the Fixing Assembly. (page 3-19)[Removing the Fixing As-
sembly]
8) Remove the Fixing Film Unit. (page 3-20)[Removing the Fixing Film
Unit]

3.5.3.2 Removing the Fixing Pressure Roller

LBP5050N / LBP5050
1) Remove the fixing pressure roller [1].
- 1 bushing [2]
- 1 bushing [3]
- 1 gear [4]
[4] [3]

3.5.4 Fixing Motor

3.5.4.1 Before Removing the Fixing Motor

LBP5050N / LBP5050
1) Remove the right cover. (page 3-2)[Removing the Right Cover]

3.5.4.2 Removing the Fixing Motor

LBP5050N / LBP5050
1) Remove the motor cover [1].
- 1 screw [2]
0018-7544
Chapter 3
[1] [2]
F-3-91
0018-7545
0018-7820
0018-7630
3-21