Scaling The Plot Screen; Changing The Setup Contents - Koden KGP-920 Operation Manual

Chapter 6
Various Navigation

6.7.3 Scaling the PLOT screen

You can select a display scale of PLOT (pages: 1, 2, 4) screen.
(1) Press to [ ] or [
The range that can be changed is as follows.
( 0.25, 0.5, 1, 2, 5, 10, 20, 50, 100, 200 )
NOTE: You can change the scale unit from Menu 2: UNIT (nm) of 8: INITIAL options.

6.7.4 Changing the setup contents

(1) Press [MODE] key until D (PLOT) screen appears.
(2) Press [SEL] key until page 6 screen appears.
(3) Press [ ] or [
(4) Press to [ENT] key to display the option.
(5) Press [ ] or [
(6) Press [ENT] key. Selected option is setup.
(Changing the event symbol)
To change the event symbol, place cursor on SYMBOL option and press ENT key.
(Activating event numbers (000 to 199))
Turn ON the EVENT option and you can save events (the present position marking) into memory
numbers (000 to 199).
(Activating event numbers (200 to 399))
Turn ON the WAYPOINT option and save events (the present position marking) into memory numbers
(200 to 399).
(On/off of course line (dotted lines))
During waypoint or route navigation, you can display or clear the course line from your present position
to the waypoint.
6-22
] key to select a desired range.
] key to locate cursor and select an item.
] key to locate cursor and select an option.
Scale indication fields
KGP-920
Initial scale: 0.025
Cursor Page number
Initial setup: +
Initial setup: ON
Initial setup: ON
Initial setup: ON
93121662-00