Getting Started; Scanning For Wireless Networks; Scan For Networks - C. Crane CC WiFi Instruction Manual

Getting Started – Turning On Your WiFi Radio
Getting Started – Turning On Your WiFi Radio
Note: Configuring a WiFi radio is similar to navigating through a cell
Note: Configuring a WiFi radio is similar to navigating through a cell
phone menu.
phone menu.
Plug the power adapter cube into a 120V AC power outlet. Connect
Plug the power adapter cube into a 120V AC power outlet. Connect
the power adapters small plug into the jack on the back of the radio
the power adapters small plug into the jack on the back of the radio
that is labeled "DC IN 7.5V".
that is labeled "DC IN 7.5V".
Caution: Use only the power adapter supplied with the radio.
Caution: Use only the power adapter supplied with the radio.
Connecting a power adapter other than the one that was sup-
Connecting a power adapter other than the one that was sup-
plied with your radio could cause permanent damage to the
radio and may be hazardous.
plied with your radio could cause permanent damage to the
After a few seconds the display on the front of the radio will light up
radio and may be hazardous.
and show:
After a few seconds the display on the front of the radio will light up
and show:
Followed by:
Followed by:
Followed by:
Followed by:
Starting ...
Starting ...
Followed by:
Followed by:

Scanning for Wireless Networks

When <Scan for Networks> is displayed, press "SELECT" by press-
Scanning for Wireless Networks
ing "in" the main dial (the main dial should click when pressed in).
The display will show:
When <Scan for Networks> is displayed, press "SELECT" by press-
ing "in" the main dial (the main dial should click when pressed in).
6
Page 6
The display will show:
CC WiFi Radio
CC WiFi Radio
Reciva Enabled
ARM Powered
Reciva Enabled
ARM Powered
and
and
<

Scan for Networks

Enter Network
<
Scan for Networks
Enter Network
Initialising
Network
Initialising
Network
>
>
CC WIFI
CC WiFi