Getting Started; Turning The Radio On - C. Crane CCWiFi Instruction Manual

Getting Started – Turning On Your WiFi Radio
Plug the power adapter cube into a 120V AC power outlet. Connect
the power adapters small plug into the jack on the back of the radio
that is labeled "DC IN 7.5V".
Caution: Use only the power adapter supplied with the radio.
Connecting a power adapter other than the one that was
supplied with your radio could cause permanent damage to the
radio and may be hazardous.
After a few seconds the display on the front of the radio will light up
and show:
Followed by:
Followed by:
Starting ...
Followed by:
If the radio cannot find any wireless networks, then the display will
show:
If no networks are found, see page 33 for troubleshooting assistance.
Page 6
CC WiFi Radio
Reciva Enabled
ARM Powered
and
Scanning
No networks
found
Initialising
Network
CC WiFi