Getting Started; Turning The Radio On - C. Crane CCWiFi Instruction Manual

Getting Started – Turning On Your WiFi Radio
Note: Configuring a WiFi radio is similar to navigating through a cell
phone menu.
Plug the power adapter cube into a 120V AC power outlet. Connect
the power adapters small plug into the jack on the back of the radio
that is labeled "DC IN 7.5V".
Caution: Use only the power adapter supplied with the radio.
Connecting a power adapter other than the one that was sup-
plied with your radio could cause permanent damage to the
radio and may be hazardous. After a few seconds the display on the front of the radio will light up
and show:
CC WiFi Radio
Followed by:
Reciva Enabled
ARM Powered
Followed by:
Initializing
Network
Followed by:
< >
Scan for Networks
Enter Network
Page 6 CC WiFi