Toshiba Carrier RAS-12EKCV-UL Service Manual page 103

No. Part name
Side cabinet 1. Side cabinet (right)
…
2. Side cabinet (left)
Detail A
Fan motor 1) Perform work of item 1 of
†
2) Remove the flange nut fixing the fan motor
3) Remove the propeller fan.
4) Disconnect the connector for fan motor
5) Remove the fixing screws (4 pcs.) holding
Procedure
1) Perform step 1 in ‚
ƒ .
2) Remove the fixing screw used to secure
the side cabinet and heat exchanger.
3) Remove the fixing screw (screw 2 pcs.)
used to secure the plate conduit and
side cabinet.
4) Remove the fixing screw (screw 3 pcs.)
used to secure the side cabinet to the
bottom plate and valve fixing panel.
1) Perform step 1 in ‚
2) Remove the fixing screw used to secure
the side cabinet (left) onto the heat
exchanger.
3) Remove the fixing screw (SCREW 2 pcs.)
used for securing the side cabinet to the
bottom plate and heat exchanger.
Detail B
and the propeller.
• Flange nut is loosened by turning clock-
wise. (To tighten the flange nut, turn
counterclockwise.)
from the inverter.
by hands so that the fan motor does not
fall.
* Precautions when assembling the fan
motor
Tighten the flange nut using a tightening
.
torque of 3.3 lbf ft (4.5 N
and all the steps in
.
Detail C
and .
 ‚
m).
•
– 104 –
FILE NO. SVM-13071
Remarks
A
B
C
Propeller fan
Fan motor
Flange nut