Canon iR3245 Troubleshooting Manual page 49

If the main power indicator on the control panel does not light even though the main power switch is ON,
be sure to check the breaker to see if it is OFF. (See "When the Power Does Not Turn ON, " on p. 3-109.)
3
The screens shown below are displayed while the system software is
loading.
If login authentication by a login service (SSO-H (Single Sign-On H)) is not set,
and an application other than MEAP is selected as the initial function in Common
Settings (from the Additional Functions screen):
☐
The Start Up screen is displayed until the machine is ready to scan.
If a message is displayed on the touch panel display, proceed to step 4.
☐
The screen below is displayed when the machine is ready to scan.
Main Power and Control Panel Power
1
1-15