Canon iR3245 Troubleshooting Manual page 215

Load A4 size paper.
Cause The optimum paper size selected by the Automatic Paper Selection mode is not available in the
machine.
Remedy 1 Load the indicated paper size into the machine. If you press
displayed, prints are made with the currently selected paper size.
Remedy 2 If the message continues to be displayed even if the indicated paper size is loaded, set Drawer
Eligibility For APS/ADS in Common Settings (from the Additional Functions screen) for that paper
drawer to 'On' . (See e-Manual > Additional Functions.)
Return page 1 to the top, and then press the Start key.
Cause Scanning was stopped due to a problem with the optional feeder.
Remedy Arrange the originals in page order with the first page on top. Place the originals back into the
feeder's original supply tray, and press
Return page 1 to the top, and then press the Start key. (Data for the scanned original has exceeded limits on
the size that can be handled by this machine. Automatically adjust settings and try again.)
Cause Scanning has stopped because the data size of the scanned original exceeds the maximum data
size that the machine can handle.
Remedy Try scanning the original again from the first page. If scanning is still not possible, reduce the
Sharpness mode setting, and select [Text] for the original type.
Scanning has stopped because the size of the data for the scanned original exceeds the limit. Scanning may
be possible if [Sharpness] is reduced and the type of original is set to [Text].
Cause Scanning has stopped because the data size of the scanned original exceeds the maximum data
size that the machine can handle.
Remedy Reduce the Sharpness mode setting, and select [Text] for the original type.
Remove the paper from the output tray.
Cause Prints from the previous job remain in the output tray.
Remedy Remove the prints remaining in the output tray. Printing automatically resumes.
(Start) while this message is
(Start).
List of Error Messages
3
3-93