Canon iR3245 Troubleshooting Manual page 56

4
1
1-22 Main Power and Control Panel Power
When the following screen appears, wait for the machine to complete the
shutdown process.
If you need to immediately operate the machine after starting the shutdown process, press [Restart] →
[Yes].
If you press [Restart] when device information is being updated, a message asking for your confirmation
to continue appears on the screen. Press [Yes].
You can also force the shutdown of the machine (omitting the normal job cancellation
process) by pressing [Forced Off]. If you press [Forced Off] while data is being processed or
the machine is shutting down, a message asking for your confirmation to continue appears
on the screen. Press [Yes]. However, as it is possible that this will destroy data which is being
processed or cause damage to the machine, it is not recommended. Note that Canon will not
be liable for any damages resulting from the loss of data on the hard disk drive. For more
information, contact your local authorized Canon dealer.
•
When the machine shuts down, it also performs an internal cooling down process. It may take some time
for the machine to shut down due to this process.
•
It may take some time for the machine to completely shut down depending on the application you are
using.
•
The screen below is displayed when you press [Forced Off] in any of the following cases.
- When the hardware is finishing process
- When device information is being updated