Finisher-S1/Puncher Unit-Q1/R1/S1 (Optional); Replacing The Staple Cartridge - Canon iR3245 Troubleshooting Manual

Finisher-S1 /Puncher Unit-Q1/R1/S1 (Optional)
This section describes the procedure for replacing the staple cartridge in the optional Finisher-S1,
and removing punch waste from the optional Puncher Unit-Q1/R1/S1.
2
The name of the puncher unit may differ according to the regions.

Replacing the Staple Cartridge

When the optional Finisher-S1 is almost out of staples and the staple cartridge must be replaced,
a screen similar to the one shown below appears on the touch panel display. Follow the procedure
described below to replace the staple cartridge.
Use only staple cartridges intended for use with this machine.
We recommend that you order staple cartridges from your local authorized Canon dealer before your stock runs
out.
2-30

Finisher-S1/Puncher Unit-Q1/R1/S1 (Optional)