Ch Surround Decoder Operations - Clarion VRX93SVD Owner's Manual

• SPEAKER GAIN
This function sets speaker output level.
This function is not available for speakers whose
SPEAKER SEL setting is set to OFF.
3-1. Touch the [SPEAKER GAIN] key to show
the submenu.
3-2. Touch the [FRONT L], [CENTER], [FRONT
Rl, [SURROUND R], [SURROUND L] or
[SUB WOOFER] key to set respective item.
3-3. Touch the[.] or [T] key to make adjust-
ments in the range -10 dB to +10 dB in 1
dB step increments. The default value is "0
dB".
• DELAY
This function adjusts the timing of the speakers
so that they are synchronized with front speaker
output.
, This function is not available for speakers whose
"SPEAKER SEL" setting is set to OFF.
3-1. Touch the [DELAY] key to show the
submenu.
3-2. Touch the [CENTER SPj or [SURROUND
SP] key to set respective item.
3-3. Touch the [.] or [T] key to adjust.
[CENTER SP]:
Adjustments are made in the range 0 ms to
5 ms. The default value is "0 ms".
[SURROUND SP]:
Adjustments are made in the range 0 ms to
15 ms. The default value is "0 ms".
• DOLBY D
This function sets the dynamic range compres-
sion.
This function is not available for speakers whose
"SPEAKER SEL" setting is set to OFF.
3-1. Touch the [DOLBY Dj key to show the
submenu.
3-2. Touch the [MAX], [STD] or [MIN] key to se-
lect respective item.
The default value is [MAX].
4. When all settings are completed, press the
[ADJ] button or touch the [RTN] key to return
to the previous mode.
5. 1 ch Surround Decoder Operations
Output adjustment of subwoofer volume,
center volume and balance/fader
1. Press the [A-M] button and touch the
[DETAIL] key.
2. To make an adjustment on :
.Subwoofer volume adjustment
2-1. Touch the [SUBWOOFER VOL] key, then
touch the [.] or [T] key to adjust to desir-
able level.
", The factory default setting is
"0".
(Setting
range: -6 to
3)
.Center volume adjustment
2-1.
Touch the [CENTER VOL] key, then touch
the [.] or
[T]
key to adjust to desirable
level.
", The factory default is
"0".
(Setting range:-6
to 0)
• Balance/Fader adjustment
2-1. Touch the [BAUFAD] key.
Touch the [.] or [T] key to adjust the bal-
ance level.
[.] key: emphasized the sound from the
front speakers.
[T]
key: emphasized the sound from the
rear speakers.
2-2. Touch the [' 4 111] or [..-] key to adjust the fader
level.
[' 4 111] key: emphasized the sound from the
left speakers.
[..-] key: emphasized the sound from the
right speakers.
3. When the adjustment is complete, touch the
[RTN] key or press the [A-M] button to return
to the STANDARD screen.
VRX935VO
59