Clarion VRX93SVD Owner's Manual page 42

VISUAL Operations
This function is available when a VTR, etc. is
connected to the visual 1 or visual 2 terminal.
*
The visual
1
mode is not available when a DVD
changer is connected to the visual 1.
For your safety, the driver should not watch
the
VTR,
etc. or operate the controls while
driving. Please note that watching and op-
erating the VTR, etc. while driving are pro-
hibited by law in some countries.
Switching
to
the VISUAL mode
Notes:
• For your safety, the VRX935VO has
a
safety func-
tion which turns off the picture when the car is
moving, so only the audio can be heard. The pic-
ture can only be watched when the car is stopped
and the parking break
is
applied.
1. Press the
[FUNC]
buton and select the VI-
SUAL mode.
2. Press the
[BAND]
button to select the VI-
SUAL
1
or VISUAL2.
Switching the VTR system between
NTSCand PAL
*
This function is enabled only when the panel is
open.
Switch to the VISUAUVTR in TV mode you use.
1. Press the [AOJ] button to switch to the AD-
JUST MODE menu.
2. Touch the
[NTSC/PAL]
key,
[NTSC]
key and
[PAL]
key appears in the display.
3. Touch the
[NTSC]
key or
[PAL]
key to select
"NTSC"
or
"PAL".
Adjusting the brightness and tone
of color
Notes:
.. This function is not available when the display is
stored.
• The HUE setting can be adjusted only when the
NTSC mode is selected.
• Switch to the VISUAUOVO player(OVO video or
video CO)/OVO changerlTV mode you see.
1. Press the [AOJ] button to switch to the AD-
JUST MODE menu.
2. Touch the
[MONI ADJ]
key to display
[BRIGHT], [HUE]
and
[COLOR]
key. Touch
the
[BRIGHT], [HUE]
and
[COLOR]
key to
42
VRX935VD
adjust BRIGHT, HUE and COLOR.
• "BRIGHT":
Adjust the brightness of the display.
."HUE":
Adjust the tone of color (red is emphasized
or green is emphasized)
• This operation is available onfy when the car is
stopped and the parking brake is applied.
• "COLOR":
Adjust the color saturation.
• This operation is available onfy when the car is
stopped and the parking brake is applied.
3. Operate the touch key to adjust a level.
• "BRIGHT":
[-] key or [+] key
• "HUE";
[R] key or [G] key
• "COLOR":
[-] key or [+] key
4. When adjustment is made, touch the
[RTN]
key to return to the ADJUST MODE menu.
Touch the
[RTN]
key again to return to the
STANDARD screen.
, To return from the adjust a level display to the
STANDARD screen, press the [ADJ] button
once again.
Changing over monitor display size
':' This function is available only when the panel is
open.
Note
• This function is not available whife you are driv-
ing.
• Switch to the VISUAUOVO player(OVO video or
video CO)/OVO changerlTV mode you see.
1. Press the
[OISP]
button for 1 second or
longer to change over the monitor display
size. Each time you press the
[DISP]
button,
the monitor display size changes in the fol-
lowing order:
"NORMAL" ~ "WIDE" ~ "F. WIDE" ~
"CINEMA"
~
"NORMAL"
• "NORMAL":
(normal display)
There is a black area at both right and left
ends of a display- In case of normal TV
broadcasting (4:3), the image can be shown
without being cut or deformed.