Table of Contents
Advertisement
Quick Links
VRX938R
Owner's manual & Installation manual
Mode d'emploi et manuel d'installation
Bedienungs- & Installationsanleitung
Manuale d'Istruzioni e d'Installazione
Gebruiksaanwijzing en installatie-aanwijzingen
Manual de instrucciones y de instalación
Bruksanvisning- och installations
Manual do proprietário e manual de instalação
VRX938R
7.0" MONITOR, CD & RDS-EON FM/MW/LW RADIO WITH
NAVIGATION / CeNET CONTROL
MONITEUR 7,0", LECTEUR CD ET RADIO FM/PO/GO RDS-
EON AVEC NAVIGATION/COMMANDE CeNET
7-ZOLL-MONITOR, CD & RDS-EON UKW/MW/LW RADIO MIT
NAVIGATION/ CeNET-STEUERUNG
RADIO RDS-EON FM/MW/LW CON MONITOR DA 7 POLLICI
E LETTORE CD CON CONTROLLO NAVIGAZIONE/CeNET
7.0" MONITOR, CD & RDS-EON FM/MW/LW RADIO MET
NAVIGATIE / CeNET BEDIENING
MONITOR DE 7,0", REPRODUCTOR DE DISCOS
COMPACTOS Y RADIO DE RDS–EON FM/MW/LW CON
CONTROL DE NAVEGACIÓN/CeNET
7,0-TUMS BILDSKÄRM, CD-SPELARE OCH RDS-EON FM/
MV/LV-RADIO MED NAVIGATIONS/CeNET-KONTROLLER
COMBINAÇÃO DE LEITOR DE CDs E RÁDIO RDS-EON FM/MW/
LW COM MONITOR DE 7,0" E NAVEGAÇÃO/CONTROLO CeNET
•
•
•
•
•
•
•
Advertisement
Table of Contents
Related Manuals for Clarion VRX938R
Summary of Contents for Clarion VRX938R
-
Page 1: Controls
Owner’s manual & Installation manual Mode d’emploi et manuel d’installation Bedienungs- & Installationsanleitung Manuale d’Istruzioni e d’Installazione Gebruiksaanwijzing en installatie-aanwijzingen Manual de instrucciones y de instalación Bruksanvisning- och installations Manual do proprietário e manual de instalação VRX938R 7.0" MONITOR, CD & RDS-EON FM/MW/LW RADIO WITH NAVIGATION / CeNET CONTROL •... -
Page 2: Nomenclature
CAUTIONS: This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT”. To use this model properly, read this Owner’s Manual carefully and keep this manual for your future reference. In case of any trouble with this player, please contact your nearest “AU- THORIZED service station”. -
Page 3: Table Of Contents
Thank you for purchasing the Clarion VRX938R. 4. DISPLAY 1. PRECAUTIONS This owner’s manual is for the VRX938R. Please read this owner’s manual in its entirety before operating this equipment. After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). -
Page 4: Display
When the display open CONTROLS / COMMANDES / REGLER / CONTROLLI 3. NOMENCLATURE [A•M] button [ADJ] button REGELAARS / CONTROLES / KONTROLLER / CONTROLOS • Shows the AUDIO MODE menu for tone adjust- • Shows the ADJUST MODE menu to change the Names of Buttons ment, etc. - Page 5 Color LCD Display Radio/RDS/DAB/TV mode BBC OXFD (Station name) PROGRAM CD/CD changer mode SHINE (User title) USER TITLE CD TEXT mode SHINE (Disc title) DISC TITLE Time has come (Track title) TRACK TITLE Time has come (Artist) ARTIST MD changer mode SHINE (Disc title) DISC TITLE Time has come (Track title)
-
Page 6: Outline Of Button And Touchkey Operation When The Display Is Open
OUTLINE OF BUTTON AND TOUCHKEY OPERATION WHEN THE DISPLAY IS OPEN DISPLAY 1: An example screen indication in the radio mode 2: Press an operation button to switch the screen. The operation button is [FUNC] button in the description of operation per mode. 3: Touch the screen and the menu correspond- ing to the play mode is displayed. - Page 7 Z-ENHANCER TYPE 2 PTY LANGUAGE ENGLISH VRX938R...
-
Page 8: Remote Control
6. REMOTE CONTROL When the panel is open Receiver for remote control unit Remote control unit Operating range: 30˚ in all directions Signal transmitter Inserting the Batteries 1. Turn the remote control unit over, then slide the rear cover in the direction of the arrow. AA (SUM-3, IECR-6/1.5V) 2. -
Page 9: Functions Of Remote Control Unit Buttons
Functions of Remote Control Unit Buttons CD changer Mode MD changer Radio (RDS) Button DVD changer 1 FUNC Switches among radio, DAB, CD, DVD, CD changer, MD changer, DVD changer, TV and VISUAL. 2 BAND Switches reception Plays the first track. Moves the next disc Switches reception DISC UP... -
Page 10: Dcp
7. DCP The control panel can be detached to prevent theft. 2. Press the left side of the DCP carefully to fit it When detaching the control panel, store it in the in place. DCP (DETACHABLE CONTROL PANEL) case to prevent scratches. -
Page 11: Cautions On Handling
8. CAUTIONS ON HANDLING LCD panel/Generalities For a longer service life, be sure to read the following cautions. • Be sure to store the LCD panel inside the main • Do not place anything on the display when the unit when parking the car outdoors for long pe- panel is tilted. -
Page 12: Handling Compact Discs
Handling Compact Discs Use only compact discs bearing the mark. Do not play heart-shaped, octagonal, or other specially shaped compact discs. Some CDs recorded in CD-R mode may not be usable. Even when recorded in CD-RW mode, some CDs not be usable. Handling Storage •... -
Page 13: Operations
9. OPERATIONS Note: Be sure to read this chapter referring to the front diagrams of Basic Operations chapter “2. CONTROLS” on page 5 (unfold). Adjusting the volume CAUTION Operate the [VOL] button in the direction of the + When the unit is turned on, starting and stopping (up) or –... -
Page 14: Showing A Mode Display
Basic Operations Showing a mode display Adjusting the angel, etc. of the When the panel is open: liquid crystal panel Touch the menu screen switching touchkey when The angle of the liquid crystal panel or protruding the main screen is being displayed to show the amount of the panel from the mounting surface menu screen. - Page 15 Basic Operations Turning the liquid crystal panel When the panel is closed: Each time you press the [Z-EHCR] button of the horizontal (Air conditioner remote control unit, the tone effect changes in the operation mode) following order: When the way the liquid crystal panel is mounted “Z-EHCR 1”...
-
Page 16: Adjusting The Balance And Fader
Basic Operations Adjusting the Z-enhancer Adjusting the balance and fader Note: Note: • This function is enabled only when the panel is open. • This function is enabled only when the panel is open. 1. Press the [A-M] button to change into the AU- 1. -
Page 17: Radio Operations
Radio Operations Basic Operations [DISP] button to switch to CT display. Listening to the radio If CT is not being received, “CT--:--” appears in the 1. Press the [FUNC] button and select the RA- display. DIO mode. The frequency or PS is displayed. Note: PS: Programme service name •... -
Page 18: Radio Operations
Radio Operations LOCAL SEEK Manual memory If you press and hold the right (d) or (a) left 1. Press the [BAND] button and select the de- side of the [SEARCH] button for 1 second, lo- sired band. (FM or AM (MW/LW)) cal seek tuning is carried out. -
Page 19: Rds Operations
RDS Operations When the reception deteriorates, the “AF” indicator RDS (Radio Data System) flickers. This unit has a built in RDS decoder system that AF function between RDS and DAB supports broadcast stations transmitting RDS data. This system can display the name of the When the same programme is broadcast by both broadcast station being received (PS) and can RDS and DAB, and this function is ON, the unit... -
Page 20: Selecting Pty
RDS Operations Manually tuning a regional station Auto store function for TP stations in the same network You can automatically store up to 6 TP stations into preset memory. If the number of TP that can Note: be received is less than 6, broadcast stations al- •... -
Page 21: Rds Operations
RDS Operations Cancelling PTY standby mode PTY item Touch the [RDS MODE] key in the MENU display ENGLISH Contents and the [PTY] key appears in the display. News News Touch the [PTY] key and “PTY ON” switches to Affairs Current Affairs “PTY OFF”. -
Page 22: Cd Operations
CD Operations RDS Operations 5. When “ITEM SELECT” is selected, PTY se- Loading a CD lection is carried out. 1. Insert a CD into the centre of the insertion slot Touch the [w] key or [z] key to select PTY with the label side facing up. -
Page 23: Random Play
CD Operations [SEARCH] button, the track advances ahead play to show SUB MODE. to the beginning of the next track. Touch the [TRACK REPEAT] key. “TRACK Track-down REPEAT” lights in the display and current track is repeated. 1. Press the left (a) side of [SEARCH] button to move back to the beginning of the current track. -
Page 24: Cd/Md Changer Operations
CD/MD Changer CD Operations Operations Scrolling a CD-text title Note: CD/MD changer functions • This function is enabled only when the panel is open. When an optional CD (MD) changer is connected When a CD-text title is longer than 10 characters, through the CeNET cable, this unit controls all CD you can scroll the display as follows. -
Page 25: Selecting An Md
CD/MD Changer Operations When the panel is open: Selecting a disc from 1 to 6 1. Touch the screen to show the menu screen Touch the [DISC SELECT] key in the display, the while the main screen is being shown. [DIRECT] key (1 to 6) appears in the display. - Page 26 CD/MD Changer Operations Top function (MD) 2. To cancel repeat play, touch the [TRACK RE- PEAT] key. “TRACK REPEAT” goes off from The top function plays from the first track (track the display and the unit returns to normal play. No.
-
Page 27: Dvd Changer Operations
DVD Changer Operations • DVD changer functions Switching to a next disc(Disc Up When an optional DVD changer is connected function) through the CeNET cable. The disc up function plays from the first track (track In this case, this unit only provides a part of the DVD No1) of the next disc. -
Page 28: Repeat Playback
DVD Changer Operations If you are playing a disc with PBC and the PBC Chapter repeat playback function is engaged, this operation cannot be This operation plays back chapters recorded on performed. the DVD-Video repeatedly. 1. Press the [RPT] button. Repeat playback 2. -
Page 29: Dvd Changer Operations
DVD Changer Operations Scan playback Press and hold the button, and the playback speed becomes 4-time faster first and then This operation plays back all tracks on the disc, 8-time faster 3 seconds later. Release the the first 10 seconds for each. button, and the normal speed is restored. -
Page 30: Tv Operations
TV Operations TV functions Seek tuning When an optional TV tuner is connected through 1. Press the [BAND] button and select the de- the CeNET cable, this unit controls all TV tuner sired TV band (TV1 or TV2). functions. To watch TV requires a TV tuner. If “MANU”... -
Page 31: Setting The Tv Area
TV Operations Recalling a preset station Switching the VTR system between A total of 12 TV stations can be stored (6-TV1 NTSC and PAL and 6-TV2). This allows you to select your favorite This function is enabled only when the panel is open. TV stations and store them in memory for later Switch to the VTR/VISUAL/DVD video/DVD recall. - Page 32 TV Operations Adjusting the brightness and tone Changing over monitor display size This function is available only when the panel is of color open. Notes: Note • This operation is available only when the car is • This function is not available while you are driving. stopped and the parking brake is applied.
-
Page 33: Digital Radio/Dab Operations
Digital Radio/DAB Operations About DAB programmes Manual tuning The Digital Audio Broadcasting (hereinafter re- 1. Press the [FUNC] button to select DAB mode. ferred to as “DAB”) system transmits several 2. Press and hold the [BAND] button for 1 sec- programmes on one frequency simultaneously, by ond or longer. - Page 34 Digital Radio/DAB Operations Programme scan Setting TA standby mode If you press the [TA] button when only “TP” is lit in This function scans through each receivable pro- the display, “TP” and “TA” light in the display and gramme in a DAB station being received for 10 the unit is set into TA standby mode until a traffic seconds sequentially.
- Page 35 Digital Radio/DAB Operations Information select Preset PTY item This function allows selecting a type of INFOR- number ENGLISH Contents MATION on INFORMATION interrupt mode. You News News can set any of the 6 types of INFO below: Info Information TRAFFIC, WARNING, NEWS INFO, WEATHER, Pop M Pop music EVENTS, SP.
-
Page 36: Dynamic Label Function
Digital Radio/DAB Operations 3. When “PRESET” is selected, PTY preset DLS display mode memory can be called for and stored. Touch the [LABEL MODE] key in the MENU dis- 4. Touch the preset No.1 to 6 key to call for the play and touch the [DYNAMIC LABEL] key to preset PTY ITEM. -
Page 37: Navi Operations
“COMPOSITE”: Setting when a composite image of other company’s equipment is in- put. 3. Touch the [Clarion] key to set connection of Clarion NAVI. NAVI operation Changeover between NAVI display and Audio/Vi- sual (hereinafter referred to as AV) displays. When... -
Page 38: Connecting Other Company's Image Equipment
Touch the [NAVI SELECT] key to select the panel turns on for 5 seconds; following items: “ON”: Button illumination is always on when the “Clarion”: Setting when Clarion NAVI is con- power is turned on; nected; 1. When the panel is open, press the [ADJ] but- “RGB”: Setting when a RGB image of other... - Page 39 Other Functions 3. Touch the [TITLE INDEX] key in the MENU dis- Cellular phone interrupt setting play. If you connect this unit and your cellular phone Touch the [INPUT] key in the USER TITLE dis- with a separately sold cable, you can listen to your play, the display switches to the title input mode telephone calls on your car speakers.
- Page 40 Other Functions 4. Press the [ADJ] button again to return to the Setting the beep STANDARD display. The sound heard when you make operations is called “beep”. The unit can be set up so that it does not produce this beep sound. Anti-theft indicator The factory default is “BEEP ON”.
-
Page 41: Dsp Operations
DSP operations DSP control function Auto loudness adjustment Touch the [w] or [z] key to adjust an auto If the DSP (DPH913), sold separately, is connected loudness level (0 to 10). to this unit using the CeNET cable, all the func- tions of the DSP can be controlled. - Page 42 DSP operations turn to the STANDARD display. MODE display. Entering titles 2. Touch the [z] key to select “POSI. DETAIL”. Touch the [POSI. DETAIL] key to show Posi- You can give a title to the user memory of the tion Detail adjusting display. G.EQ, DSF, VSE and P.EQ that you have adjusted yourself.
-
Page 43: Dsp Operations
DSP operations Calling G.EQ BASIC Pattern/USER SIC/USER pattern selection/memory display. Pattern 6. Press and hold one of [DIRECT] buttons for 2 1. Press the [A-M] button to show the AUDIO- seconds or longer to store the adjusted G.EQ MODE display. pattern to be USER memory. - Page 44 DSP operations By pressing the [BAND] button in BASIC pat- Professional mode/VSE opera- tern selecting display or USER pattern selec- tions tion/memory display you can switch between the two patterns, BASIC and USER. Note: 4. After the setting, press the [A-M] button again •...
- Page 45 DSP operations Setting and storing VSE Properties/ 3. Each time the [ON/OFF] key is touched, the on and off statuses are switched alternately. Memory into USER Pattern 4. After the setting, press the [A-M] button again 1. Repeat the steps 1 and 2 of the previous pro- or touch the [RTN] key to return to the STAN- cedure (Calling VSE BASIC Pattern/USER DARD display.
-
Page 46: Dvd Video Operations
DVD Operations DSP operations The P.EQ adjustment contents are as follows: Operation “FRONT/REAR” Play/Still operation s ] button for about 1 “BAND” Pressing and holding the [s second or longer switches to the desired mode Select the channel to be compensated (front (play, still (pause)). -
Page 47: Visual Operations
VISUAL Operations This function is available when a VTR, etc. is con- nected to the visual/input or CCD/visual 2 termi- nal. The visual 1 mode is not available when a TV tuner is connected to the visual/input. The visual 2 mode is not available when a CCD camera is connected to the CCD/visual 2 termial. -
Page 48: In Case Of Difficulty
10. IN CASE OF DIFFICULTY Problem Cause Measure Power does not Fuse is blown. Replace with a fuse of the same amperage. If the turn on. fuse blows again, consult your store of purchase. (No sound is produced.) Incorrect wiring. Consult your store of purchase. - Page 49 Problem Cause Measure The image is not The parking brake is not Check that the parking brake is applied. displayed. pulled. The display is The brightness control is too Adjust the brightness properly. dark. low. The operating condition is The temperature inside the vehicle may be 0˚C or not good.
-
Page 50: Error Displays
11. ERROR DISPLAYS If an error occurs, one of the following displays is displayed. Take the measures described to eliminate the problem. Error Display Cause Measure ERROR 2 A CD is caught inside the CD deck and is This is a failure of CD deck’s mechanism not ejected. -
Page 51: Specifications
12. SPECIFICATIONS FM (UKW) Tuner General Frequency range: Power source voltage: 87.5 MHz to 108 MHz (0.05 MHz steps) 14.4 V DC (10.8 to 15.6 V allowable) Ground: Negative AM Tuner Current consumption: 4.0 A (1 W) Auto Antenna Rated Current: 500 mA less Frequency range: MW: 531 kHz to 1602 kHz (9 kHz steps) Dimensions of the Main Unit:...
Need help?
Do you have a question about the VRX938R and is the answer not in the manual?
Questions and answers