Clarion VRX93SVD Owner's Manual page 24

Basic Operations
Adjusting the MID
The MID gain, MID frequency (center fre-
quency) and MID Q can be adjusted as follows.
1. Press the [A-M] button, then touch the
[USER CUSTOM] key.
2. Touch the [DETAIL] key, then touch the [MID]
key.
3. When the bass type selection screen is dis-
played, touch the key for the desirable type
to select it.
4.
Touch the
[A]
or
[T]
key to adjust to desir-
able level.
GAIN : -6
to
6
(The factory default setting
is "0")
FREQ. : 700Hz/1 kHz/2kHz (The factory de-
fault setting is "1 k")
Q : 1.5/2 (The factory default setting is
"2")
5. When the adjustment is complete, touch the
[RTN] key several times or press the [A-M]
button to return to the previous mode.
Adjusting the TREBLE
The treble gain and treble frequency (center
frequency) can be adjusted as follows.
1. Press the [A-M] button, then touch the
[USER CUSTOM] key.
2. Touch the [DETAIL] key, then touch the
[TREBLE] key.
3. When the bass type selection screen is dis-
played, touch the key for the desirable type
to select it.
4. Touch the
[A]
or
[T]
key to adjust to desir-
able level.
GAIN : -6 to 6 (The factory default setting
is "0")
FREQ. : 8kHz/12kHz (The Factory default
setting is "12K")
5. When the adjustment is complete. touch the
[RTN] key several times or press the [A-M]
button to return to the previous mode.
Adjusting the balance/fader
1. Press the [A-M] button, then touch the [DE-
TAIL] key.
2. Touch the [BAUFAD] key.
3. Touch the
[A]
or
[T]
key to adjust to the
fader level.
'" The factory default setting is "0". (Adjustment
range: front 13 to rear 13)
[A]
key: Emphasized the sound from the
front speakers.
[T]
key: Emphasized the sound from the
rear speakers.
4.
Touch the [ ~] or [~] key to adjust to the bal-
ance level.
,'The factory default setting is "0". (Adjustment
range: left 12 to right 12)
[~] key: Emphasized the sound from the left
speakers.
[~] key : Emphasized the sound from the
right speakers.
5. When the adjustment is complete, touch the
[RTN] key several times or press the [A-M]
button to return to the previous mode.
Adjusting the Beat EO
1. Press the [A-M] button and select "BASS
BOOST
or
IMPACT
or
EXCITE".
2. Touch the [DETAIL] or [LEVEL] key to dis-
play the level adjustment screen.
3. Touch the
[A]
or
[T]
key to adjust to desir-
able level.
When BASS BOOST is selected, you can ad-
just the bass in the range of -3 to 3.
., When IMPACT and EXCITE is selected, you
can adjust the bass and treble in the range of -
3 to 3.
4. When the adjustment is complete, touch the
[RTN] key several times or press the [A-M]
button to return to the previous mode.
Turning on/off the loudness
The loudness effect emphasizes the bass to
create a natural sound tone. When you are lis-
tening to music at a low volume, it is recom-
mended to use the loudness effect.
1. Press and hold the [A-M] button for 1 second
or longer to turn on the loudness effect.
When the loudness effect is turned on, "LO"
lights in the display.
2. Press and hold the [A-M] button for 1 second
or longer to turn off the loudness effect. "LD"
goes off in the display.
24
VRX935VD