Clarion VRX93SVD Owner's Manual page 72

• Connecting the Accessories
• Connection to the external amplifier
The external amplifier can be connected unless the MCP (Multiple Channel Processor) is
connected. For detailed information, refer to the instruction manual of the MCP.
• Connection to the CCO camera for vehicle
The CCO camera for vehicle can be connected to the system expansion terminal on the main unit.
For detailed information, refer to the instruction sheet or manual for the CCO camera.
Notes:
• A power supply box (sold separately) is required for connection of the main unit and the CCO camera.
• While the CCO camera is used, the navigation cannot be turned on.
• The power supply box for camera CAA 147 cannot be used. Please use the CAA 188 instead.
• If the specified lead of the cellular phone is connected to the phone mute
lead of the source unit, the audio mute is available when the cellular
telephone is used.
• SIRIUS Satellite Radio
When the SIRIUS is to be connected, use the CeNET connector. For detailed information, refer to
the instruction manual of the SIRIUS.
• TVTunner
When the TV TUNER is to be connected, connect the CeNET connector and RCA PIN (yellow). For
detailed information, refer to the instruction manual of the TV TUNER .
• Connecting the parking brake lead
Connect the lead to parking brake lamp earth
in the meter panel.
Notes:
• Connecting the parking brake lead to lamp earth
allows you to watch TV/VTR/OVO video/video
CO when the parking brake is engaged.
G
When the parking brake lead is not connected,
the monitor will stay off
72
VRX935VD
Parking brake lamp
~
lead to battery
8
d
}
Connect these three leads.
- cor
parking
C
brake slg nal
-==========================:::\
lead Parking brake lead
\ (bright green)
~
Parking brake