Ch Surround Decoder Operations - Clarion VRX775VD Owner's Manual & Installation Manual

5.1 ch Surround Decoder Operations

This function is available when an optional 5.1 ch
Surround Decoder (DVH940N) is connected.
When the 5.1 ch Surround Decoder is connected
through the CeNET cable, the 5.1 ch Surround
Decoder Control unit (DVC920, optional) cannot
be used.
5.1 ch Surround Decoder control
function
This section describes operation procedures of
setting functions.
For details on each function, refer to the owner's
manual supplied with the 5.1 ch Surround
Decoder.
* Requires an optional amplifier.
Note:
• The 2-ZONE mode is disabled when the DVH940N
is connected.
• The AUTO VOLUME function cannot be operated.
1. Press the [ADJ] button to display the ADJUST
menu.
2. Touch the [AUDIO EXT.] key.
3. Perform setting for the desired item.
See the following sections for details.
4. Touch the [Back] key to return to the previous
screen.
* In the following sections, only the details
regarding settings are described, procedures
to select setting items are skipped.
62
●SPEAKER SEL (speaker selection)
This function determines center speaker,
surround speaker and subwoofer connection.
3-1. Touch the []] key of the SPEAKER SEL item
to show the submenu.
3-2. Touch the [ON] or [OFF] key of the CENTER
SP, SURROUND SP or SUBWOOFER item
to turn speakers on or off, depending on
what speakers are connected.
• The factory default setting is "ON"
• The phase of the "SUBWOOFER" is
reversed in the "ON-" setting. The default
value is "ON+".
●Dolby PLII CONTROL
* This function is available only when the MUSIC
MODE is selected for Dolby PLII. For setup
details, see "Selecting the Dolby PLII (Dolby Pro
Logic II) type" (page 65).
3-1. Touch the []] key of the Dolby PLII
CONTROL item to show the submenu.
3-2. Perform setting for the PANORAMA,
DIMENSION or CENTER WIDTH item.
[PANORAMA]:
Touch the [ON] or [OFF] key to select. "OFF"
is the default value.
[DIMENSION]:
Touch the [[] or []] key to adjust the level
between 0 and 6. The default level is "3".
[CENTER WIDTH]:
Touch the [[] or []] key to adjust the level
between 0 and 7. The default level is "3".