Clarion VRX93SVD Owner's Manual page 44

VISUAL Operations
.Lock system monitor image and sound
~ ~~~;1)1----'
Front monitor
I:C~ONE
- - -...- - - - - - - - - -
------ Rear monitor 3 ZONE
(*1) Visual 2 connection Visual 2 connection lock
"'", [OTHERS] [NAVI]
I
Front image Image of device Image of device Displays image of Image of device
(receiver connected to the connected to the mode selected connected to the
screen) Visual 2 terminal Visual 2 terminal using the [FUNC]
I
V.isual 2 terminal
(';'3) button (-,·3)
1-- ---
f - - - - - - - - - - - - - - - . - - -
- - . J L -
- - I
Rear monitor Image of device Displays image of Image of device connected to the
image connected to the
I
mode selected Visual 1 terminal
(separately
I
Visual 2 terminal
I'
using the [FUNC]
sold)
I
(:::3)
I
button (*2)
__
.~_~_._._ _~......
. . .._._ _ - - - l -_ _ . _ ..
.1 .._ . _ ._._._".
Vehicle speaker
I
Plays sound of mode selected using the [FUNC] button
sound
I
",1 A
device connected to the Visual
2
terminal should be set up as described in the section "Switch-
ing Connect."
"'2 No image is displayed on the rear monitor when a non-image mode such as radio, SIRIUS, CD, etc.
is engaged.
'3 For safety reasons, this image is not displayed when the vehicle is moving. The picture can be
watched only when the vehicle is standing still and the parking brake is engaged.
2-Z0NE: 1 (front monitor lock)
1. Press the [M.L] button.
2. Press the [FUNC] button to select the de-
sired mode.
3. To cancel the monitor lock, press the [M.L]
button.
The screen shows the image of the selected
mode.
; When the front monitor lock is engaged,
[MENU],
[LIST],
[KEY PAD], [ADJ]
and
[A-M]
button cannot be used. Cancel the monitor
lock when you wish to use these buttons
2-Z0NE: 2 (rear monitor lock)
1. Press the [ADJ] button to display the AD-
JUST MODE menu.
2. Touch the [REAR MONI LOCK] key and the
[ON] key.
3. Touch the [RTN] key or press the [ADJ] but-
ton.
4. To cancel the monitor lock, press [ADJ] but-
ton, touch the [REAR MONI LOCK] key and
the [OFF] key.
44
VRX935VD
5. Touch the [RTN] key or press the [ADJ] but-
ton.
The monitor lock is now canceled.
Locking the front monitor and rear
monitor (3-Z0NE)
1.
Lock the rear monitor by performing the in-
structions in steps 1 to 3 above.
2. Press the [M.L] button to lock the front moni-
tor.
3.
Press the [FUNC] button.
The image for the selected mode is dis-
played for about
5
seconds after which the
front monitor lock image is displayed.
4. To cancel the monitor lock, press the [M.L]
button.
5. To cancel the rear monitor lock, press the
[ADJ] button, touch the [REAR MONI LOCK]
key and the [OFF] key.