Table of Contents
Advertisement
Switching the hob off
Once you have switched off all of the cooking zones, you should switch
the hob off.
o Press the ON/OFF button.
o It is possible to turn the hob off at any time by
Residual heat indicator
o IMPORTANT: The residual heat indicator will disappear if your
mains supply is cut. Care should be taken in case the surface
temperature is still high.
Pan sensor
Each zone has a sensor on it, so it can detect the presence of a pan.
o The sensor is fine-tuned to detect a pan being placed on it. The
pan should be one size smaller than the nominal diameter of the
zone.
o If after placing a pan on a cooking zone and
o If a cooking zone is selected but no pan is detected, the pan
sensor
system
approximately every few seconds. If no pan is detected after 1
minutes the hob will automatically switch off
o You should check that your pans are suitable for use on an
induction zone hob (see the pan manufacturer's trademark or
instructions).
pressing the ON/OFF button.
o After
a
corresponding cooking zone indicator will
show a letter "H". This means that the
temperature of the zone is over 60°C and is
therefore still high enough to cause injury.
selecting that cooking zone, a "U" shaped symbol
appears on the cooking zone indicator, this means
that the pan is either the incorrect size or shape.
Or it could be made from a material that is
inappropriate for use on an induction zone hob.
will
check
15
zone
is
switched
for
the
presence
off,
the
of
a
pan
Advertisement
Table of Contents
