Disassembly Procedures
!
Rear Roller Removal
1. Disconnect power supply to unit.
2. Remove Rear Bulkhead.
3. Remove Roller Keeper and nut.
©2005 Maytag Services
WARNING
16025911 Rev. 0
To avoid risk of electrical shock, personal injury or
death; disconnect power to unit before servicing.
Gas Model Disassembly
Igniter Removal
1. Disconnect power supply to unit.
2. Remove Top Cover.
3. Remove Console.
4. Remove Front Panel.
5. Loosen the single screw attaching the igniter to the
Burner Assembly. Slide the Igniter back and remove.
27