Ram 100 Front Installation/ Foot Pedal Release - RAMSET RAM 100 Instruction Manual

FRONT INSTALLATION
GATE SHOWN Closed
Tail on gate required
We do not recommend use of the foot pedal on installations with steep inclines. Always
make sure the gate is secured when using the foot pedal to avoid sudden movements
from the gate. Make sure to show the end-user proper safety precautions when using the
WARNING
foot pedal.
After proper use of the foot pedal, be sure to lightly kick the pedal towards the right side to spring the pedal
up and re-engage your gate.
Figure 5
NOTE: Your operator will not respond until your gate is properly engaged.
RAM 100 FRONT INSTALLATION
FOOT PEDAL RELEASE
Gate Engaged
Padlock
(optional use)
www.ramsetinc.com
TAIL WALL
13 7/8"
5 3/4"
6" min
Gate Disengaged
RAMSET
Figure 4
7