Ramset "Intelligate" Control Board - RAMSET RAM 100 Instruction Manual

RAMSET
Introduction:
Ramset's "Intelligate" Control Board works
with Sliding, Swinging and Overhead vehicular
gate operators. It is controlled by a program-
mable microprocessor that reads and precisely
executes all functions of the Control Board.
The Control Board is powered by a separate
mounted 24 VAC transformer. This allows no
necessary board modifications between 110
Power Transformer
40VA.
3 Button Station
Dipswitches
Automatic Timer, Prewarn,
Constant Warning, Secure Close,
Full Reverse ERD, Radio Cycle,
One Pass, Low / High ERD,
Adjustment, Close Delay,
Open Delay and Left / Right.
Foot Pedal Plug
Stops the motor from running
while the foot pedal is engaged.
Master / Slave Plug
Synchronizes movement between two
gates. 3 wires (A-, B- and Common).
Standard Connections
Reverse Loop, Fire Box, Exit Loop,
Phantom Loop, Radio, Edge Sensor,
24 VAC and Magnetic Lock.
16

RAMSET "INTELLIGATE" CONTROL BOARD

jP9
jP3
jP11
jP7
www.ramsetinc.com
VAC and 220 VAC single-phase applications.
Some of the functions of the Control Board
are: 0 - 60 seconds automatic close timer, self
adjusting E.R.D. with low and high setting,
constant warning, prewarning, secure close,
one pass, open & close delay, left/right hand
operation, plug-in loop detectors and RS485
three wire master/slave connection.
Reverse Loop
Exit Loop
Phantom Loop
jP10 jP2
Figure 19
Relay Connections
Indicator lights, alarms and sirens.
Microprocessor
Reprogrammable, controls
all functions of the operator.
ERD
Self adjusting, with low
and high adjustments.
3 Button Station
Open - Stop - Close