LIONEL LEGACY CONTROL SYSTEM
Controlling Your Layout: ACCESSORIES
Accessory Options
Enter all the options in the Accessory Options
section of the INFO menu.
To access Accessory Options
1. Press ACC
2. Enter accessory ID# (1-99)
3. Press INFO to access Naming Screen
4. Input desired name (see page 47)
5. When the last letter of the name you are entering is
highlighted, DO NOT press the ADD soft key, simply
press the NEXT soft key.
6. Enter a number (optional)
7. Press the Set softkey or the Set button at the bottom of the remote.
Accessory Addressing Methods
Try these Accessory Addressing Methods. If your Accessory's info has not been entered in
ACCESSORY OPTIONS of the INFO menu, only the Traditional and Toggle methods outlined
in this Accessory Addressing Methods section will apply.
There are four ways to address accessories: Traditional ID#, Name, Road Number, and
Toggle.
Traditional ID
1. Press ACC
2. Enter the Accessory's ID# (1-99)
"Clean and Lubricate Your Equipment"
LIONEL LEGACY CONTROL SYSTEM
Name
1. Press ACC
2. Press SCROLL
3. Use the Velocity Throttle to scroll to the
desired name
4. Press ACC
Page 66
"Wipe Your Track Regularly"
LIONEL LEGACY CONTROL SYSTEM
Controlling Your Layout: ACCESSORIES (Continued)
Road Number
1. Press SELECT
2. Enter the Road number for the Accessory
3. Press ACC
Controlling Your Layout: SWITCHES
Switch Option
Enter options in the Switch Options section
of the INFO menu.
To access Switch Options
1. Press SW
2. Enter switch ID# (1-99)
3. Press INFO to access Naming Screen
4. Input desired name (see page 47)
5. When the last letter of the name you are entering is
highlighted, DO NOT press the ADD soft key, simply
press the NEXT soft key.
"Clean and Lubricate Your Equipment"
LIONEL LEGACY CONTROL SYSTEM
Toggle
1. Press ACC
2. Press ACC again to toggle between your last
two accessory addresses
3. Now pressing any key will activate that Ac-
cessory Control Panel in the Touch-Screen
and activate the NAME and other info in the
Display.
Page 67
"Wipe Your Track Regularly"
Need help?
Do you have a question about the Legacy Control System and is the answer not in the manual?
Questions and answers