Advertisement
This unit has a function which allows you to project movies, which were recorded on film, in the best possible conditions.
(Function to convert 2-3 pull-down interlace scans to progressive scans)
Normally use set to AUTO.
1
The main menu appears on the screen.
2
5
The "Setting 1" submenu appears on the screen.
3
The "Setting 2" submenu appears on the screen.
4
5
5
OFF:
When watching images recorded with a video camera
ON:
When watching images recorded on film
AUTO: The setting is changed automatically
6
• Operates when the signal is an NTSC or PAL interlace signal. Does not operate for other signals. (The menu is not
displayed when other signals are inputted.)
∞
3
5
∞
3
∞
2
3
In the "Image adj." submenu, adjust brightness, contrast, sharpness, etc. to obtain the desired picture quality. Note that the
adjustment items differ in Video menu mode and PC menu mode.
1
The main menu appears on the screen.
2
The "Image adj." submenu appears on the screen.
Image adj.
Brightness
12
Contrast
12
Sharpness
1
Color
12
Tint
12
All reset
ENTER
3
4
2 2 2 2
3 3 3 3
2 or 3
Gets darker/brighter. (–30 ↔ 0* ↔ +30)
Brightness
2 or 3
Gets lower/higher. (–30 ↔ 0* ↔ +30)
Contrast
Gets softer/sharper.
• Video menu mode: (–5 ↔ 0* ↔ +5)
• PC menu mode: (1 ↔ 3* ↔ 5)
2 or 3
Sharpness
• When in the PC menu mode, if the resize function in the PC submenu is set to
"1:1", the image quality will not change even if the value is changed.
Gets softer/deeper. (–30 ↔ 0* ↔ +30)
2 or 3
Color
(Video menu mode only)
Gets reddish/greenish. (–30 ↔ 0* ↔ +30)
2 or 3
Tint
(Video menu mode only)
Resets above items to the factory set values. How to operate is mentioned below
All reset
ENTER
(next page).
I
• In the Image adj. submenu, select "All reset" with the cursor button 5 or ∞, and press the ENTER button. Then, the "All
reset" submenu appears on the screen.
• Press the cursor button 2 to select "Yes", and then press the ENTER button.
• All items in the "Image adj." submenu are reset to the factory set values and the menu returns to the previous one.
To exit the "All reset" submenu without performing All reset, select "No" with the cursor button 3 and, press the ENTER
button.
(To be continued on the next page)
5 5 5 5
∞ ∞ ∞ ∞
3 3 3 3
Image adj.
Brightness
12
Contrast
12
Sharpness
1
2
3
4
5
All reset
ENTER
5 5 5 5
∞ ∞ ∞ ∞
Advertisement
