Advertisement
I
Main Menu in Video Menu Mode (While receiving video-device-related signals)
→
Image adj.
(Refer to page 48)
Brightness:
Brightness of the video image being projected can be adjusted. (–30 to +30, 0*)
Contrast:
Contrast of the video image being projected can be adjusted. (–30 to +30, 0*)
Sharpness:
Sharpness of the video image being projected can be adjusted. (–5 to +5, 0*)
Color:
Color density of the video image being projected can be adjusted. (–30 to +30, 0*)
Tint:
Tint of the video image being projected can be adjusted. (–30 to +30, 0*)
All reset:
Resets above items to the factory set values.
Yes / No
Setting 1
Position:
Video screen position and menu position can be adjusted.
Disp. Posi. / Menu
Image tone can be changed. TV*/Cinema (Suitable for the cinema programes)
Tone:
page 51)
Aspect change:
Selectable aspect ratio, 4:3*/16:9.
Selectable color systems, Normally, set to AUTO. (Refer to page 44)
Decoder:
(This item is displayed only when inputting VIDEO or Y/C.)
AUTO*/NTSC/NTSC4.43/PAL/SECAM
Setting 2
Press ENTER to enter the Setting 2 submenu
Tracking: Normally, no adjustment is required. The lateral size and display area of video image can be
→
adjusted. (–128 to + 127)
Film:
Set when watching movies which were recorded on film.
Flickering or dim picture image can be adjusted. (0 to 31) → (Refer to page 46)
Phase:
Screen:
Selectable screen's aspect ratio. 4:3*/16:9
HDTV:
Selectable HDTV format. Normally, set to 1080i, 1080i*/1035i
Setting 1: Press ENTER to return to "Setting 1" submenu.
Color temp.
Color temp.:
Adjustable color temperature, Low/Middle*/High.
Will be adjusted to correct reddish or blueish image.
R-Gain:
Adjusts the red leve. (0 to 255, the adjustable range varies depending on signals)
G-Gain:
Adjusts the green leve. (0 to 255, the adjustable range varies depending on signals)
B-Gain:
Adjusts the blue leve. (0 to 255, the adjustable range varies depending on signals)
All-reset:
Reset above items to the factory set values.
Yes/No
→
Options
(Refer to page 53)
Options 1
Menu display:
15sec* (Menu disappears in 15 seconds.) / ON (Menu stays on.)
Line display:
5sec* (Line display such as "VIDEO", "Y/C", "PC1", or "PC2" appears on top right of the screen for
5 seconds when the VIDEO or PC button is pressed.) / OFF (Line display does not appear.)
Keystone:
Press ENTER to enter the Keystone submenu.
Keystone:
Adjust to correct the trapezoidal distortion of the projected image.
(–80 to +128, 0*)
PC2 (BNC):
RGB or YP
P
*. Set to RGB when a computer device with analog RGB, V, H/Cs signals is
B
R
connected to the PC2 terminals. Set to YP
or DTV-format signals (Y, P
Options 2:
Press ENTER to enter the "Option 2" submenu.
Right Left rev.:
OFF* / ON (Select for upside-down hanging on the ceiling.)
Top Bottom inv.:
OFF* / ON (Select for upside-down hanging on the ceiling.)
RS-232C [bps]:
Selectable baud rate (transmission speed). 9600 / 19200*
Sleep time [min]:
Selectable sleep times. If no-signal condition continues for the period of
selected time (Unite: Minutes), the projector enters the stand-by mode. 15 / 30
/ 60 / OFF*
Options 1:
Press ENTER to return to the "Option 1" submenu.
Language
Language for on-screen display.
Japanese / English* / German / Spanish / Italian / French
→
Information
(Refer to page 55)
Input:
Shows the terminal name selected by the VIDEO or PC button. (Y/C, VIDEO, or PC2)
Switcher:
Has no meaning. This display currently has no meaning, ("CH.0" is usually displayed to indicate
that it is not being used.)
Source:
Shows the projected image's type of video signal.
Lamp time:
Accumulated used hours of the light-source lamp.
→
(Refer to page 50)
→
(Refer to
→
(Refer to page 51)
(Refer to page 46)
→
(Refer to page 45)
→
(Refer to page 45)
P
when a device with component signals (Y, B-Y, R-Y)
B
R
, P
) are connected to the PC2 terminals.
B
R
→
(Refer to page 45)
I
5 ∞
5 ∞
2 3
Menu
Image adj.
3
Brightness
Setting
Image adj.
Contrast
Color temp.
Sharpness
Brightness
All reset
Options
Contrast
Language
Sharpness
Information
All reset
5
5
∞
5 ∞
2 3
Menu
Setting
Image adj.
Tracking
3
Setting
Tracking
Phase
Color temp.
Phase
Position
Options
Position
Resize
Language
Resize
Clamp
Information
Clamp
5
∞
5 ∞
2 3
Menu
Color temp.
Image adj.
3
Setting
R-Gain
Color temp.
Color temp.
G-Gain
R-Gain
Options
B-Gain
G-Gain
Language
All reset
B-Gain
Information
All reset
∞
5
5 ∞
2 3
Menu
3
Options 1
Image adj.
Menu display
Line display
Menu display
Setting
Keystone
PC2 (BNC)
Color temp.
Line display
Right Left rev.
Options
Top Bottom inv.
Keystone
RS-232C
Language
PC2 (BNC)
Sleep time
Information
Options 2
∞
5 ∞
∞
5
Menu
Language
Image adj.
Setting
English
English
Color temp.
Deutsch
Deutsch
Options
Español
Español
Language
Italiano
Italiano
Information
Français
Français
∞
5
Menu
Image adj.
PC 1
Input
Setting
• The display languages of the menus are set to "English" when the projector is
Switcher
CH.0
Color temp.
Resolution
1280
1024
bought. The display language can be selected from the following 6 languages:
Frequency H
79.9
kHz
Options
"
(Japanese)", "English (English)", "Deutsch (German)", "Español
Frequency V
75
Hz
Language
Lamp time
123
h
(Spanish)", "Italiano (Italian)" and "Français (French)". (Refer to page 45.)
Information
The language settings in the section are explained in "English".
2 3
Image adj.
All reset?
12
Yes
No
12
1
2
3
4
5
ENTER
5 ∞ 2 3
Position
123
Disp.Posi.
Menu
12
ENTER
12,12
ENTER
1:1
Panel
Aspect
ST
FP
BP
2 3
Color temp.
Low
Middle
High
All reset?
123
Yes
No
123
123
ENTER
Keystone
0
15sec
ON
5sec
OFF
ENTER
RGB
YP
P
B
R
ENTER
Options 2
Right Left rev.
OFF
ON
Top Bottom inv.
OFF
ON
RS-232C [bps]
9600
19200
Sleep time [min]
15
30
60
OFF
Options 1
ENTER
5 ∞
2 3
Advertisement
