How To Make The Feed Plate - Brother KE-434C Instruction Manual
E series electronic lockstitch pattern tacker electronic lockstitch pattern tacker with stepping foot
Hide thumbs
Also See for KE-434C:
- Parts manual (108 pages) ,
- Instruction manual (83 pages) ,
- Parts list (11 pages)
Table of Contents
Advertisement
17. MAKING THE FEED PLATE AND WORK CLAMP PLATE FOR INNER CLAMPING DEVICE
17-3. How to make the feed plate
Label
2631Q
1. Align the center of the top edge of the seam with the reference point C on the feed plate (1).
Condition 1 & 2: a = 77
Condition 3: a = 74
2. Make the dimensions 6 mm larger than the size of the stitch.
3. Measure the size of positioning plate L (2) and positioning plate R (3) (shaded section).
4. Make the feed plate (1) so that the size overlaps the sizes in 2. and 3. above.
* If the size in step 2. is larger than the size in 3., then use the size in step 2. for processing.
70
Stitch
KE-434C,435C
Stitch
2632Q
2633Q
- Quick Links:
- Table of Error Codes
Hide quick links:
Advertisement
Table of Contents
