Installing The Needle Sub Plate - Brother KE-434C Instruction Manual

E series electronic lockstitch pattern tacker electronic lockstitch pattern tacker with stepping foot

Hide thumbs Also See for KE-434C:

Table of Contents

3-16. Installing the needle sub plate

1. Install the four needle sub plate supports (1) with the four

2599Q

screws (2).

2. Insert the needle sub plate (3) from the front of the machine

so that it is level.

Note:

Insert the needle sub plate (3) so that the X feed lever cap

(4) sits on top of the needle sub plate (3).

3. Install the needle sub plate (3) with the four screws (5).

4. Loosen the screws (2) and make fine adjustments to the

height of the needle sub plate (3) so that it is at the same

height as the needle plate (6).

2600Q

5. Provisionally secure the two auxiliary plate supports (7) with

the washers (8) and the screws (9) and (10), and then firmly

tighten the screws (9) and (10) in that order.

2601Q

KE-434C,435C

3. INSTALLATION

Table of Contents

Show Quick Links

Table of Contents

Ke-435c