Control Panel - Toshiba e-STUDIO287CS User Manual

HOW TO MAKE COPIES
7
Press [PAPER TYPE] on the touch panel if
the paper type of the paper you placed on
the bypass tray is other than plain paper.
1
8
Select the paper type.
1) Select the paper type.
2
2) Press [OK].
3
4 Note
• If you select a wrong paper type, this could cause a
paper misfeed or significant image trouble.
• When you select a paper type, you can confirm it with
the icons displayed on the equipment status indication
area as shown below.
5
6
Paper type
PLAIN
PLAIN (THIN)
9
10
 Copying on other than the above
standard sizes of paper
1
Icon
—
- 34 -
Paper type
THICK 1
THICK 2
THICK 3
THICK 4
THICK 5
SPECIAL 1
SPECIAL 2
SPECIAL 3
SPECIAL 4
SPECIAL 5
SPECIAL 6
ENVELOPE 1
ENVELOPE 2
ENVELOPE 3
ENVELOPE 4
After setting the paper size and type, press
[OK].
The menu returns to the BASIC menu.
Select other copy modes as required, and
then press the [START] button on the

control panel.

Note
• When you copy on sheets of OHP film, remove the
copied OHP film one sheet at a time as they exit onto
the receiving tray. If the sheets of OHP film pile up, they
may get curled and may not be projected properly.
Place the original(s) and paper in the same
procedure noted in steps 1 to 5 in "Copying
on A4 and B5 size paper (in equipment
other than for North America) / LT and LG
size paper (in equipment for North
America)" ( P.33)
Icon