Bypass Copying On Standard Size Paper - Toshiba e-STUDIO287CS User Manual

Bypass copying on standard size paper

 Copying on A4 and B5 size paper (in
equipment other than for North
America) / LT and LG size paper (in
equipment for North America)
1
Place the original(s).
2
Place the paper with its copy side face up
on the bypass tray.
Note
• The height of the paper must not exceed the indicator
on the side guides.
• When you use more than one sheet of paper, fan the
sheets well before placing them on the bypass tray. Be
careful not to cut your fingers when fanning.
• Do not push paper into the entrance of the bypass
feeder. This could cause a paper misfeed.
3
Align the side guides to the paper length,
and push the blue set button.
1
2
4
Press [BYPASS FEED] on the touch panel.
5
Press [ZOOM] on the touch panel.
6
Select the same size button under "COPY"
as that of the paper you placed on the
bypass tray.
The paper size is now set.
Note
• If the paper size is not selected in this step, copying
may be slowed down.
- 33 -
HOW TO MAKE COPIES
1
2
3
4
5
6