Bypass Copying On Standard Size Paper - Toshiba e-Studio2500c Operator's Manual
Toshiba multifunctional digital color system operator's manual for basic function
Hide thumbs
Also See for e-Studio2500c:
- Operator's manual (412 pages) ,
- Service manual (402 pages) ,
- Scanning manual (156 pages)
Table of Contents
Advertisement
2 HOW TO MAKE COPIES
Bypass copying on standard size paper
Copying on A3, A4, B4 and B5 size paper
1
Place some sheets of paper
with their copy side down on
the bypass tray. Align the side
guides to the paper length
while holding A.
The message "Ready for bypass
feeding" appears.
Rear side of the side guides of the bypass tray has an indicator for paper height. The
height of the sheets must not exceed this indicator.
When you use more than one sheet, fan the sheets well before setting them on the
tray.
Do not push the sheets into the entrance of the bypass feeder; this may cause a
paper jam.
When the paper size is larger, draw out the two-stage paper holder.
2
Place the original(s).
90
Bypass Copying
A
Advertisement
Table of Contents
