Hinge (40) Assembly - Sony DCR-TRV12E Service Manual

DCR-TRV12E/TRV14E/TRV19/TRV19E

2-9. HINGE (40) ASSEMBLY

2
Rotate to the "A" marked portion
2
Screw
1
(M1.7 × 4), counterclockwise by 90 degrees
lock ace, p2
Rotate the "B" marked portion
3
counterclockwise by 90 degrees
in the direction of the arrow
A
8 Remove the FP-626 flexible board
3
B
3
9 Harness (PV-140)
Caution
Rotation of the LCD panel has limitation due to its hinge
in this model. Excessive force to rotate the LCD panel
damages the hinge.
(Refer to "Caution"of 2.1 Pcabinet assembly.)
Caution
If the FP-626 flexible board is removed once, the
adhesion strength of a double-sided tape decreases.
Use the new FP-626 flexible board at the time of an
assembly.
that is attached by the doble-sided tape
Dowel for setting
the position
4 Three claws
5 Hinge cover (C) (40)
0 Hinge (40) assembly
Remove the Harness (PV-140) in the direction
of the arrow
Bend the Harness (PV-140) along with connector
2-10
7 Hinge cover (M) (40)
6 Screw
(M1.7 × 4),
lock ace, p2
Hinge (40) assembly