DCR-TRV12E/TRV14E/TRV19/TRV19E
2-19. CONTROL SWITCH BLOCK (FK-CX4000)
Screw
5
(M1.7 × 4),
lock ace, p2
Screw
2
(M1.7 × 4),
lock ace, p2
Screw
1
(M1.7 × 4),
lock ace, p2
Pull and remove the
3
Cabinet L assembly (40E),
shoe frame, etc.
2-20. JK-242 BOARD
JK-242 board,
3
FP-625 flexible board
FK flexible retainer
4
Control switch block
7
(FK-CX4000)
Flexible cover
Remove the Harness of the
6
control switch block (FK-CX4000)
from the Flexible cover
Two screws
2
(M1.7 × 2.5),
lock ace, p2
Sheet Z
1
Caution
When installing, fix the flexible board of the Control switch
block (FK-CX4000) with the FK flexible retainer as shown
in the illustration.
Caution
When installing, pass harness of the Control switch block
(FK-CX4000) the through the Flexible cover by the
marked
.
A
Flexible cover
Harness
Caution
Install the Sheet Z as shown in the illustration.
2-18
FK flexible retainer
Flexible board
A
Sheet Z