Daikin Super Multi Plus E-Series Service Manual page 321

SiEN18-622
5. Press the TEMP button.
6. Diagnose by the sound.
7. Determine the error code.
8. Exit from the diagnosis mode.
Troubleshooting
s or TEMP t and change the digit until you hear the sound of "beep".
Press TEMP
H"pi" : The both numbers of tens and units do not accord with the error code.
H"pi pi" : The number of tens accords with the error code.
H"beep" : The both numbers of tens and units accord with the error code.
The digits indicated when you hear the "beep" sound are error code.
Press the MODE button.
Service Check Function
(R4277)
(R4278)
309