Auto Dry Cool Heat Fan Operation - Daikin Super Multi Plus E-Series Service Manual

Instruction

2.2.5 Auto Dry Cool Heat Fan Operation

The air conditioner operates with the operation mode of your choice. From
the next time on, the air conditioner will operate with the same operation
mode.
To start operation
1. Press "MODE" selector button and select
•
2. Press "ON/OFF" button .
To stop operation
3. Press "ON/OFF" button again.
To change the temperature setting
4. Press "TEMPERATURE adjustment
DRY or FAN mode
The temperature setting is not variable.
210
an operation mode.
Each pressing of the button advances the
mode setting in sequence.
: AUTO
: DRY
: COOL
: HEAT
: FAN
<FTK>
<FTX>
• The OPERATION lamp lights up.
• Then OPERATION lamp goes off.
button".
AUTO or COOL or HEAT mode
Press "
"
to lower the temperature.
Set to the temperature you like
POWERFUL
" to raise the temperature and press
"
C
ECONO
ON/OFF
TEMP
MODE FAN SWING
SILENT COMFORT SENSOR
ON CANCEL
OFF
TIMER
System Configuration
SiEN18-622
4
2, 3
1
5