Daikin Super Multi Plus E-Series Service Manual page 236

Instruction
2.2.11 HOME LEAVE Operation
HOME LEAVE operation is a function which allows you to record your
preferred temperature and air flow rate settings.
To start HOME LEAVE operation
1. Press "HOME LEAVE button".
To cancel HOME LEAVE operation
2. Press "HOME LEAVE button" again.
Before using HOME LEAVE operation
To set the temperature and air flow rate for HOME LEAVE operation
When using HOME LEAVE operation for the first time, please set the temperature and air flow rate for HOME LEAVE
operation. Record your preferred temperature and air flow rate.
Cooling
Heating
1. Press "HOME LEAVE button". Make sure "
2. Adjust the set temperature with "
3. Adjust the air flow rate with "FAN" setting button as you like.
Home leave operation will run with these settings the next time you use the unit. To change the recorded information,
repeat steps 1 – 3.
224
• " " is displayed on the LCD.
• The HOME LEAVE lamp lights up.
• " " disappears from the LCD.
• The HOME LEAVE lamp goes off.
Initial setting
temperature Air flow rate
25° AUTO
25° AUTO
" or "
ON
OFF
temperature
18-32°C
10-30°C
" is displayed in the remote control display.
" as you like.
SiEN18-622
CANCEL
TIMER
Selectable range
Air flow rate
5 step, AUTO and SILENT
5 step, AUTO and SILENT
System Configuration
1, 2