PCI riser card
Complete the following steps to install an adapter:
1. Read the safety information beginning on page 113 and "Installation guidelines"
on page 23.
2. Turn off the server and peripheral devices and disconnect all power cords and
external cables (see "Turning off the server" on page 7); then, remove the cover
(see "Removing the cover" on page 27).
3. Determine which expansion slot you will use for the adapter.
4. If you are installing an adapter in PCI slot 1 or 2, remove the PCI
low-profile-card cage.
PCI low-profile-
card cage
Latch
PCI-X slot 3 64-bit
3.3V 133 MHz (PCI3)
PCI-X slot 4 64-bit
3.3V 133 MHz (PCI4)
Chapter 4. Installing options
31