Temperature Sensor Heating/Drying (2R30); Temperature Limiter (1F1, 2F1) - Miele T 9800 Descriptive Technical Documentation

031-6
2.1.4

Temperature sensor heating/drying (2R30)

Temperature sensor heating/drying (2R30) at the reflective plate, under the back
service panel, NTC characteristic curve, refer to 030 Table 3.
2.1.5

Temperature limiter (1F1, 2F1)

Two 3/4 bi-metal temperature limiters (1F1, 2F1) with manual reset at the burner.
The bi-metal temperature limiter (1F1) at the burner exit serves to detect any
overheating of the burner due to insufficient air or air leakage.
The bi-metal temperature limiter (2F1) at the burner entrance serves to detect any
flame flashback.
This information should not be duplicated or passed on without Miele approval. All rights reserved.
Descriptive Technical Documentation
DTD no. 12-9800
05.12.2006, US_am