Warning And Safety Instructions - Miele T 9800 Descriptive Technical Documentation

DTD no. 12-9800
A

Warning and Safety Instructions

1 General
All repairs should be performed by a trained technician in strict accordance with
national, state and local codes. Any repairs or maintenance performed by
unqualified personnel could be dangerous.
When servicing, modifying, testing or maintaining appliances, all applicable laws,
regulations and accident prevention guidelines must be observed.
Before starting any service work, disconnect the dryer from its power source.
Even with the appliance switched off, voltage may exist on some components.
Danger!
Danger of high voltages when working on small components.
In a 1 board control, as in this Control/Program/Power module (EPWL 3xx),
there is no structural galvanic potential disconnection to the power supply.
Therefore be careful when working on small components, these may be carrying
voltage if the dryer is not disconnected completely from its power supply.
As a matter of standard practice, do a visual as well as an operational check.
Danger!
Wear protective gloves and use edge shields (M. no. 05057680) to prevent cuts
by sharp-edged components.
05.12.2006, US_am
Descriptive Technical Documentation
This information should not be duplicated or passed on without Miele approval. All rights reserved.
A-1