Miele TOUCHTRONIC T 9820 Operating Instructions Manual

Miele clothes dryer user manual

Advertisement

Operating Instructions for the
T 9820 Gas Dryer
en - US, CA
To prevent accidents
and machine damage
read these instructions
before
installation or use.
M.-Nr. 07 268 170

Advertisement

Table of Contents
loading

Summary of Contents for Miele TOUCHTRONIC T 9820

  • Page 1 Operating Instructions for the T 9820 Gas Dryer en - US, CA To prevent accidents and machine damage read these instructions before installation or use. M.-Nr. 07 268 170...
  • Page 3 ,WARNING For your safety the information in this manual must be followed to minimize the risk of fire or explosion or to prevent property damage, personal injury or death. Do not store or use gasoline or other flammable – vapors and liquids in the vicinity of this or any other appliance.
  • Page 4: Table Of Contents

    Contents IMPORTANT SAFETY INSTRUCTIONS....... . . 5 Control panel ........... . . 8 First use .
  • Page 5: Important Safety Instructions

    WARNING - To reduce the risk of fire, electric shock or injury to persons when using your appliance follow basic precautions, including the following: The T9820 gas dryer is only approved for use in the USA and Canada. It is not approved for use in Mexico.
  • Page 6 IMPORTANT SAFETY INSTRUCTIONS Allow the dryer to complete each stage of the program selected, including the cooling down phase. This will ensure that the items being removed are not too hot to handle. Do not repair or replace any part of the appliance or attempt any servicing unless specifically recommended in these Operating instructions.
  • Page 7 Faulty components must only be replaced with original Miele spare parts. If the power cord is damaged it must only be replaced by a Miele Service technician with a genuine Miele power cord. IMPORTANT SAFETY INSTRUCTIONS Using accessories Only use genuine Miele accessories.
  • Page 8: Control Panel

    Control panel a Program buttons To select a drying program b Options buttons Special features to enhance a drying program c Check Filter/Vent indicator Indicates to clean the filter or vent d Status indicator Shows the current cycle of the drying program e Start/Stop button Starts and stops a program, or if...
  • Page 9: First Use

    First use Metal components of the dryer's gas burner have a protective coating which may give off a slight odor the first time the appliance is turned on. The smell will dissipate after a short time and does not indicate a faulty connection or appliance defect.
  • Page 10: Before Loading The Dryer

    Before loading the dryer Clean the drum interior before the first use. Fabric care labels Before drying, check fabric care labels for special drying instructions. q = Drying with a normal temperature r = Drying with a low temperature s = Do not dry in a tumble dryer Drying tips –...
  • Page 11: Use

    1. Sort the laundry ^ Sort the laundry by desired dryness, fabric, size and similar residual moisture after spinning to assure even drying results. Do not dry items that may melt or ignite in the dryer such as plastics or rubber.
  • Page 12 2.2. With laundry basket Reduce the load size to ½ of a normal load. Use the laundry basket to dry or air e.g. sport shoes. The laundry basket is designed in such a way that it does not turn with the drum and avoids strain on the drying item.
  • Page 13: Select A Program

    2.3. Close the door To prevent fabric damage, check that laundry will not be caught in the closed door. The lint filter must always be inserted in the door opening. ^ Close the door with a firm swing and push it closed. 3.
  • Page 14: Select An Option

    4. Select an option ^ Press any button. The combination "Turbo/Gentle" is not possible. Turbo Heat resistant items (with fabric care symbol q) will be dried at a high temperature. – Laundry will be dried faster. Gentle Items sensitive to high temperatures (with fabric care symbol r) will be dried at a low temperature.
  • Page 15: Start The Program

    5. Start the program During the program selection the "Start/Stop" indicator flashes meaning that the program can be started. ^ Press the "Start/Stop" button. The "Start/Stop" indicator lights. The "Status" indicator of the reached drying degree lights. Before the end of a program The heating phase is followed by the cooling phase which cools the laundry ("Cooling Down"...
  • Page 16: Program End - Unload The Laundry

    6. Program end - Unload the laundry The "Anti-crease/End" indicator will light at the end of the program and the buzzer will sound if it was selected. The indicator of the reached drying degree lights (depending on program). To avoid wrinkles, the drum turns in intervals for up to one hour, if the laundry is not immediately removed (Anti-crease).
  • Page 17: Quick Guide

    Quick Guide Remove this guide for easy reference To prevent accidents and machine damage read these instructions before installation or use.
  • Page 18 Quick Guide 1. Prepare and sort the laundry ^ Check for damages and foreign objects. ^ Close zippers, hooks and eyelets. ^ Tie up belts and apron ties. 2. Load the laundry ^ Open the door. Without the laundry basket ^ Load the laundry loosely in the drum.
  • Page 19 3. Select a program ^ Press the desired program button. 4. Select an option ^ Select an option button, if desired. The combination "Turbo/Gentle" is not possible. 5. Starting a program ^ Press the "Start/Stop" button. Quick Guide 6. Program end - Unload the laundry The Anti-crease/End indicator lights.
  • Page 20 Quick Guide Short program guide Extra Dry Multi-layer, mixed loads of sturdy cottons, e.g. towels, bath robes. The "Extra dry" program should not be selected for jersey materials. Items may shrink. Options: Turbo or Gentle, Buzzer Normal Single and multilayered cotton and linen laundry e.g.
  • Page 21: Program Guide

    Extra Dry Items Multi-layered, mixed loads of sturdy cottons, e.g. towels, bath robes. Note The "Extra dry" program should not be selected for jersey materials. Items may shrink. Options Turbo or Gentle, Buzzer Normal Items Single and multilayered cotton and linen laundry e.g. terry towels, beach towels, bath robes, T-Shirts, underwear, cotton bed linens, baby clothing, etc.
  • Page 22 Program guide Woolens Items Woolen fabrics Note – Reduce the load size to 1/3 of a normal load. – Woolen items will be fluffed for a short time, but not completely dried. – Remove the items immediately after the program end and allow them to air dry.
  • Page 23: Frequently Asked Questions

    Repairs to electrical and gas appliances must only be carried out by a qualified and trained person in accordance with local and national safety regulations. Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held responsible for unauthorized work.
  • Page 24 Frequently asked questions The laundry is not dry enough. Possible fault The load contained too many dissimilar items (size and fabrics.) The laundry is still wet. The program runs too long. The gas supply is insufficient. The drum light does not come on. The light turns off automatically (energy saving).
  • Page 25: Fault Indicators

    Fault indicators The "Check Filter/Vent" indicator lights. Possible fault The dryer does not work at its optimum or not efficiently. The lint filter might be clogged with lint or detergent residues. The exhaust duct may be too long. This is not a fault.
  • Page 26 Frequently asked questions The program is canceled. The Anti-crease/End indicator lights. The buzzer sounds. Possible fault This is not a fault. The electronic has detected that there is no laundry in the drum and cancels the program. Single items or already dried laundry can also cause a program stop.
  • Page 27: After Sales Service

    Miele Service department, Extended Service Contracts offered by other providers for Miele products will not be recognized by Miele. Our goal is to prevent unauthorized (and untrained) service personnel from working on your Miele products, possibly doing further damage to them, you and/or your home.
  • Page 29: User Maintenance Instructions

    User Maintenance Instructions To prevent accidents and machine damage, read these instructions before installation or use.
  • Page 30: Dryer Care

    Dryer Care Cleaning the lint filter The lint is collected by the lint filter in the door opening. The lint filter must be cleaned after every program. ^ Clean the lint filter whenever the "Check Filter/Vent" indicator comes ^ Pull out the lint filter. ^ Wipe the lint off the filter with your hand (do not use any sharp objects!) or use a vacuum cleaner with the...
  • Page 31: Cleaning The Exterior And The Control Panel

    Cleaning the exterior and the control panel To reduce the risk of electric shock, disconnect the dryer from the power supply by shutting off the power main, tripping the circuit breaker or unplugging the power cord before performing maintenance. Never use abrasive cleaners, scouring pads, steel wool or caustic (oven) cleaners on the dryer.
  • Page 32: Changing The Light Bulb

    ^ Remove the screw. ^ Flip the cover down. ^ Replace the light bulb with a temperature proof bulb available from Miele. The light bulb must not exceed the maximum wattage quoted on the data plate and the light cover.
  • Page 33: Caring For The Environment

    Disposal of the packing materials The packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. To prevent suffocation, ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children.
  • Page 36 All rights reserved / 2108 M.-Nr. 07 268 170 / 01 For the most updated manual please see the Miele web site.

Table of Contents