All Program Leds Flash; F 0 No Fault - Miele T 9800 Descriptive Technical Documentation

090-10
Cause
Gas: Gas burner is not heating.
Remedy
A Check the burner, refer to Gas burner
3.6

All program LEDs flash

Symptom
No program start, no access to the programming or service mode.
Cause
Demo mode is activated.
Remedy
A Deactivate the demo mode, refer to Demonstration mode
Deactivate, 090 4.2.
3.7

F 0 No fault

Cause
No fault is saved in the fault memory of the power module (ELP).
Remedy
A None.
This information should not be duplicated or passed on without Miele approval. All rights reserved.
Descriptive Technical Documentation
Check, 031 4.1.
DTD no. 12-9800
Activate /
05.12.2006, US_am