Troubleshooting; Temperature Sensor - Miele G 7835 CD Installation And Operating Instructions Manual

Troubleshooting

Temperature sensor

The washer-disinfector is equipped with
a (re-settable) temperature sensor that
switches off the heater when it
threatens to overheat. Overheating can
occur when, for example, large items
cover the heating elements or if the
filters in the wash cabinet are blocked.
If you see the fault message "Check
heater" (the water in the wash cabinet
doesn't get hot; the program sequence
lasts too long) take the following steps:
^ Remove the underlying cause.
^ Open the service flap.
^ Press the re-set button for the ther-
mostat on the right side of the plinth
(base).
If the thermostat is triggered again,
please contact Miele Technical Ser-
vice.
52