Francotyp-Postalia mymail Operator's Manual page 71

Franking machine
Table of Contents

Advertisement

Error message
TDC error
no connection
TDC error
no credit
TDC: data record
locked
TDC: mymail
disabled
TDC: mymail
not available
TDC: mymail
not released
TDC: mymail
out of operation
Too many
endorsements
Unable to connect
Underweight
Validate failed
Value exceeds user
postage limits
Warning battery low
Possible cause and remedy
Call Service.
Desired amount too high. Select a smaller amount and
repeat the procedure.
Call Service.
Call Service.
Call Service.
Call Service.
Call Service.
Endorsements card defective.
Request new endorsements card from Francotyp-
Postalia, specifying the error message.
Repeat the TELESET procedure.
The mailpiece is too light for the selected postal rates.
Check and change the postal rates.
Please load postage!
Postage value is higher than the set limit "Maximum
postage" (protection against overfranking).
To accept a correct high postage value: confirm
message by pressing the
or
Cancel by pressing the
Change battery (see Chapter 11.7).
Error messages and help
key.
key.
71

Advertisement

Table of Contents
loading

Table of Contents