Table of Contents
Advertisement
54
mymail Operator Manual
10.13 Zeroing scales
You only have to tare the scales when you
– see a display which deviates from "0 g" when there is no load on the scales or
– you want to set a pre-load (e.g. for a weighing tray).
(only for mymail with scales)
Setting the initial state for the weighing
function: Remove load from scales or
place pre-load in position.
Select "Menu" in the main menu and
confirm.
Select "Scale" and confirm.
Confirm "Zero scale".
The scales are tared.
Advertisement
Table of Contents
