Table of Contents
Advertisement
4.3
Ending franking – logging off
Caution! If you wish to disconnect the mymail from the mains:
Make sure that the mymail is in standby (display is dark, showing the date),
otherwise the safety functions installed for the protection of the print head
cannot be operational.
The mymail switches to standby mode when you have finished franking. The mymail
is left permanently connected to the mains and is ready to use quickly at the push of
a button.
When you log off, the current franking settings will be lost.
If no letters are inserted or no keys pressed, after a certain period of time the
mymail automatically switches to sleep mode (=standby). For instructions on
how to change the standby time setting, see Chapter 10.8 on page 48.
Select "Log off" and confirm.
The current date appears in the display.
The printing head moves into the idle
position. The display light goes out. The
mymail is in sleep mode (standby).
Do not forget to remove the MasterCard
when you have been working with access
control.
Franking
21
Advertisement
Table of Contents
