D. Dv Doctor; Duplex Motor Section (Ar-M201 Only) - Sharp AR-203E Service Manual

C. DV blade
1) Peel off the old DV blade.
2) Clean the attachment surface with alcohol.
3) Attach the new DV blade to the reference position.
DV blade IC
DV-BOX AS

D. DV doctor

1) Remove the screw, and remove the DV doctor.
* Clean the edge (A) section.
1)
A
2)
Note for installation
1) Insert the DG check gauge as shown in the figure.
2) After checking, install the doctor gap and fix it with a screw.
* Apply screw lock to the screw tightening section as shown in the
figure below.
MG-ROL
* After checking the DG,
apply screw lock.
FRONT
F
1
20
DG check
position
DG check
gauge
A
A
0.5 0
1)
DG check
gauge
C R
10 10 20
2
110
DG check DG check
gauge gauge
AR-203E/5420/M200/M201 DISASSEMBLY AND ASSEMBLY 8 - 21
E. DV sensor
1) Remove the Mylar.
2) Remove the screw, and remove the DV sensor.
* Clean the sensor (A) section.
B
B

10. Duplex motor section (AR-M201 only)

A. List
No. Part name Ref.
1 Duplex motor
B. Disassembly procedure
1) Remove the rear cabinet.
2) Remove two screws.
3) Remove the Duplex motor cover.
4) Remove the Duplex motor.
REAR
Note: When reassembling, be sure to engage the Duplex motor
gear with the belt on the main body side.
C. Assembly procedure
For assembly, reverse the disassembly procedure.
1)
2)
3)
2)
A
1
3
2
1