B. Ar-M200/M201 - Sharp AR-203E Service Manual

Power save indicator
On: Indicates the unit is in a power save mode.
Blinking: Indicates that the unit is initializing (when the side
cover is opened and closed or the power turned off
and on).
SCAN indicator
On: The SCAN (
is in scanner mode.
Blinking: A scan job is being executed from the computer, or
scan data is stored in the unit's memory.
Off: The unit is in the copy mode.
*3: Using the SCAN key to begin scanning
Note:
• Scanning is not possible during a copy job.
• If the SCAN ( ) key is pressed during a print job, the scan
job will be stored.
• When scanning an original that has been placed in the SPF,
only one original can be placed unless you are using Sharp-
desk.
1) Press the SCAN ( ) key.
The unit enters scan mode.

B. AR-M200/M201

For Europe
1
6 7 8 9
For SCA/SCNZ/Asia
1
6 7 8 9
AR-203E/5420/M200/M201 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4 - 3
) key has been pressed and the unit
2
1 1 2
2 2
2 1 1
10 11 12 13 14 15
2
10 11 12 13 14 15
2) Place the original you wish to scan on the document glass/
SPF.
3) Press the right copy quantity key to display the number of
the application that you wish to use for scanning.
The application numbers are initially as follows.
Application
number
SC2
SC3
SC4
SC5
SC6
4) Press the start (
Scanning will start and the scanned data will be transferred
to the application.
3 4
5
16 17
3 4 5
16 17
Application launched
E-mail (your standard e-mail program in
the Windows OS you are using)
Fax (if a fax program is installed)
OCR (if an OCR program is installed)
Microsoft Word (if installed)
Filing (if a Filing program is installed)
) key.
Display
READY TO COPY.
100% A4 0
20
18 19
Display
READY TO COPY.
100% A4 0
20
18 19
21
21