Sharp AR-203E Service Manual page 81

Main Sub
Contents
code code
10 Toner motor aging
14 Cancel of troubles other than
U2
16 Cancel of U2 trouble
20 01 Maintenance counter clear
21 01 Maintenance cycle setting
[Function]
When [OK]/[ENTER]/[START] key is pressed, the toner motor is rotated for 30sec.
After completion of this process, the machine goes into the main code entry standby mode.
[Operation] (AR-M200/M201)
1) Initial display
10-00 TONER MOTOR
EXECUTING...
[Function]
Used to cancel troubles other than U2.
∗ Cancel troubles such as H trouble which writes data into EEPROM, and perform hardware
reset.
[Operation] (AR-M200/M201)
1) Initial display
14-00 TRBL CANC.
CLEARED
[Function]
Used to cancel U2 trouble.
When [OK]/[ENTER]/[START] key is pressed, check sum of the total counter in the EEPROM is
rewritten and hardware reset is made.
[Operation] (AR-M200/M201)
1) Initial display
16-00 U2 TRBL CANC.
CLEARED
[Function]
When [OK]/[ENTER]/[START] key is pressed, the maintenance count value is cleared and
"000,000" is displayed.
[Operation]
AR-M200/M201
1) Initial display
20-01 M-CNT CLR.
CLEARED 000,000
[Function]
The currently set code of the maintenance cycle is displayed, and the newly set data are saved.
Enter the code number with [ ] [ ] key (or [Numeric] key or [
M201) and press [START] key. The entered value is saved and the display returns to the sub
code input standby state.
Code number
0 3,000 sheets
1 6,000 sheets
2 9,000 sheets
3 13,000 sheets
4 25,000 sheets
5 Free (999,999 sheets)
[Operation] (AR-M200/M201)
1) The current set value is
displayed.
21-01 M-CYCLE
4:25,000 ( 0-5 )
AR-203E/5420/M200/M201 SIMULATION, TROUBLE CODES 10 - 8
Details of function/operation
AR-203E/5420
The count value is displayed in 3 digits X 2
times repeatedly.
<Display example: 012,345>
012 → Blank → 345 → Blank → 012
0.7s
Setting Remark
Default
2) [ ] key or [Numeric] key
21-01 M-CYCLE
5:FREE ( 0-5 )
2) [ ] key or [Numeric] key
21-01 M-CYCLE
3:13,000 ( 0-5 )
0.3s 0.7s 1.0s
] [ ] key for the AR-M200/
3) [OK]/[ENTER]/[START]
key
21-01 M-CYCLE
5:FREE ( 0-5 )
0.7s