B. Installing The Software - Sharp AR-203E Service Manual

B. Installing the software

Note:
• The screen images in this manual are mainly for Windows XP.
With other versions of Windows, some screen images may be dif-
ferent from those in this manual.
• In the following explanations it is assumed that the mouse is con-
figured for right hand operation.
• If an error message appears, follow the instructions on the screen
to solve the problem. After the problem is solved, the installation
procedure will continue. Depending on the problem, you may
have to click the "Cancel" button to exit the installer. In this case,
reinstall the software from the beginning after solving the prob-
lem.
1) The USB cable must not be connected to the machine. Make
sure that the cable is not connected before proceeding.
If the cable is connected, a Plug and Play window will appear. If
this happens, click the "Cancel" button to close the window and
disconnect the cable.
Note: The cable will be connected in step 13).
2) Insert the CD-ROM into your computer's CD-ROM drive.
3) Click the "start" button, click "My Computer", and then double-
click the CD-ROM icon.
• In Windows Vista, click the "Start" button, click "Computer",
and then double-click the CD-ROM icon.
• In Windows 98/Me/2000, double-click "My Computer", and
then double-click the CD-ROM icon.
4) Double-click the "setup" icon.
In Windows Vista, if a message screen appears asking you for
confirmation, click "Allow".
5) The "SOFTWARE LICENSE" window will appear. Make sure
that you understand the contents of the software license, and
then click the "Yes" button.
Note: You can show the "SOFTWARE LICENSE" in a different
language by selecting the desired language from the
language menu. To install the software in the selected
language, continue the installation with that language
selected.
6) Read the "Readme First" in the "Welcome" window and then
click the "Next" button.
7) To install all of the software, click the "Standard" button and go
to step 12).
To install particular packages, click the "Custom" button and go
to next step.
AR-203E/5420/M200/M201 UNPACKING AND INSTALLATION 5 - 5
8) Click the "MFP Driver" button.
Click the "Display Readme" button to show information on pack-
ages that are selected.
9) Select "Connected to this computer" and click the "Next" button.
Follow the on-screen instructions.
Caution:
• If you are using Windows Vista and a security warning window
appears, be sure to click "Install this driver software anyway".
• If you are running Windows 2000/XP and a warning message
appears regarding the Windows logo test or digital signature, be
sure to click "Continue Anyway" or "Yes".
10) You will return to the window of step 8). If you wish to install But-
ton Manager or Sharpdesk, click the "Utility Software" button.
If you do not wish to install the Utility Software, click the "Close"
button and go to step 12).
Note: After the installation, a message prompting you to restart
your computer may appear. In this case, click the "Yes"
button to restart your computer.