[6] AR-PN4
MX-M753N
1.
Unpacking
A. Removal of the interface punch unit
B. Removal of the fixing member
1)
Remove the fixing member
Service Manual
C. Check the packed items
1)
Check that all the items are included in the package.
NOTE: Be sure to use the punch label bundled with the finisher.,
and never use the punch label bundled with the punch unit.
Punch position label
2.
Installation
<Note before installation>
* Before starting installation, check to insure that the data lamp on
the operation panel is not on or blinking.
A. Turn off the power of the main unit
1)
Turn OFF the power switch on the operation panel.
2)
Open the front cabinet.
Turn OFF the power switch in the front cabinet of the main unit.
MX-M753N AR-PN4 6 – 1
2 pcs.
OFF