Deleting Specific Transmission Codes; Deleting All Transmission Codes - Eldat RCU08 Operating Instructions Manual

4 Programming
4.3 Deleting Specific Transmission
Codes
1. Press the
„prog." button for at least 1.6 s. The
acknowledgment signal can be heard in a
double rhythm.
2. Select the switching output (relay) for which
the transmission code is memorized with
selection button „select 1" or „select 2".
3. Press and hold the transmission button for
which the code is supposed to be deleted until
the acknowledgment signal can be heard and
the LED lights up.
4. Briefly press the „prog." button. The deleting
procedure is completed.
4.4 Deleting All Transmission
Codes
1. Press the „prog." button for at least 1.6 s. The
acknowledgement signal can be heard in a
double rhythm.
2. Press the „prog." button again for at least 1.6 s.
A long acknowledgement signal can be heard
and all transmission codes have been
deleted.
10
select 1 select 2
µ µ
1 2
prog.
L L
10A 10A
>1,6 s
select 2
select 1
µ µ
1 2
prog.
L L
10A 10A
select 1 select 2
µ µ
1 2
prog.
L L
10A 10A
>1,6 s
select 1 select 2
µ µ
1 2
prog.
L L
10A 10A
>1,6 s
230V ~ 50Hz
2'
L
230V ~ 50Hz
2'
L
230V ~ 50Hz
2'
L
230V ~ 50Hz
2'
L